Resources
Radio link for UAV, UGV, and robotic platforms.
Some platforms need more than a video downlink. They also need telemetry, payload traffic, and operator-side access without adding separate link hardware. CY-2 brings those paths onto one compact air-ground system.
Where this use case fits
Where it fits.
This guide fits platforms that already produce a mix of traffic: video from the payload, telemetry from the controller stack, serial data from embedded devices, and occasional access to onboard services. In that setting, the job of the radio is not just range. It is keeping those paths together in a system the team can actually deploy and debug.
That is where CY-2 makes sense. It gives the vehicle and ground side a clear boundary, works with familiar interfaces, and avoids turning the installation into a pile of separate narrow-purpose links.
Typical architecture
Typical architecture.
Vehicle-side unit
Installed on the platform alongside cameras, autopilot telemetry, payload controllers, and onboard compute.
Ground-side unit
Placed with the operator to provide video access, telemetry visibility, and service access at the control end.
Traffic carried
Video, telemetry, serial payload data, and IP tunnel traffic through one radio pair.
Supported interfaces
Supported interfaces.
CY-2 is built around Ethernet, UART, and USB so it can sit naturally beside IP cameras, payload devices, embedded controllers, and operator-side laptops or displays.
- Ethernet for IP payloads and onboard compute
- UART for telemetry and serial devices
- USB for host-side or camera workflows
- Web UI for setup and monitoring
Integration examples
Integration examples.
UAV carrying camera video, autopilot telemetry, and a small onboard compute payload.
UGV carrying serial payload devices and operator-side monitoring over one radio pair.
Mobile robot linking platform data, diagnostics, and video back to a field laptop.
Why CY-2 for this workflow
Why CY-2.
The advantage here is simpler integration. Instead of stitching together separate radios and adapters for each path, the team can work with one compact architecture for mixed platform traffic.
- One radio system for mixed platform traffic
- Compact air-ground deployment model
- Familiar interfaces for embedded systems
- Ground-side visibility for setup and validation
FAQ
Questions buyers ask.
What kind of radio link is CY-2?
It is a compact air-ground radio link for platforms that need to carry video, telemetry, serial data, and IP traffic together.
Is CY-2 only for drones?
No. It is relevant to UAV, UGV, and robotic platforms that need a practical mixed-data radio path.
Related Resources
Continue exploring.
Review the product features
See specifications, interfaces, deployment model, and monitoring in one place.
Open the features pageUAV radio link for video, telemetry, and IP data
UAV radio link for camera video, telemetry, UART payload data, and IP traffic between an air unit and a ground unit.
Read this resourceUGV radio link for robots, rovers, and ground vehicles
UGV radio link for robot and rover platforms carrying telemetry, serial payload data, video, and IP tunnel traffic.
Read this resourceDrone data link for video, telemetry, and IP tunnel traffic
Drone data link for moving video, telemetry, UART serial data, and IP tunnel traffic between the aircraft and the ground side.
Read this resourceTalk to Rebhu about your platform
Share your traffic types, interfaces, and operator-side requirements.
Start a technical discussion